Auto Backwash Filtration System 10-700 M3/h Swimming Pool Water Treatment Swimming Pool Water Treatment

Hydraulic Automatic Aeration Fine Filter | Pool & Water Park Circulation Filtration System​

Water Park Water Treatment Filter, Auto Backwash, 10–700 m³/h)

Hydraulic Automatic Aeration Fine Filter (Pool Circulation & Water Treatment System)​

This equipment is a water-filtration and aeration unit​ designed for swimming pools, water parks, spa/thermal pools, seawater pools and related circulation systems—including water-treatment support for wave pools / tsunami-pool circuits—but it is not a wave-generating machine​ itself.

It works by simulating natural water-flow/aeration behavior, increasing dissolved oxygen, trapping suspended solids via multi-layer composite media, and using water-power/flow characteristics to trigger automatic backwashing—reducing manual maintenance versus traditional pressure-filter setups.

Typical flow handling: ~10–700 m³/h​ (model-dependent). Suitable for mid-to-large pools and water-attraction circulation loops.

⚠️ Note: Wave-pool / tsunami-pool “design process” specs (e.g. blower-wave 0.8–1.2m, vacuum-tsunami 1.5–3m, area 1000–20000㎡, ~2㎡/person capacity) describe the target pool/system context; the filter here treats the circulating water, not creates waves.

• Aeration / Oxygenation : Improves dissolved oxygen, helps oxidize/remove odors and some dissolved impurities
• Multi-layer Composite Filter Media : Intercepts fine particles; targets improved clarity and reduced turbidity
• Float/Separation Effect : Foam/light organics brought to surface and managed during flow/backwash
• Automatic Backwash by Water Power : Uses hydraulic characteristics to auto-backwash; less manual intervention
• Compact/Modular Layout: Smaller footprint vs. spread-out traditional filter rooms
• No Separate Backwash Pump (in integrated design): Integrated backwash tank/flow path, lowers electric use
• Low-speed High-flow Circulation Compatible: Electric demand can be ~1/4–1/5 of traditional pressure-system approaches (application-dependent)
• Corrosion-resistant, Non-toxic Water-contact Materials: For long service life in chlorinated/marine-like circuits
• PLC/Control Compatible: Can be coordinated with pool-system controls (per project BOM)

(If you also list “vacuum wave/tsunami” or “blower wave pool” as separate products later, keep those on separate pages: Wave Ball / Blower Wave Machine / Vacuum Tsunami System.)

• Swimming pools (indoor/outdoor)
• Water parks / water-play areas (circulation treatment)​
• Wave pool water-circulation support​ (not wave generation)
• Tsunami/“sea-wave” pool system water treatment support​ (area/height specs belong to wave system design)
• Thermal/spring/SPA pool circulation
• Seawater/brine pool circulation (material/compatibility check required)
• Aquatic show / themed attraction water loops
• Resort/hotel pool complexes
• Training/competition pool auxiliary filtration
• Can be paired with: disinfection, pH/ORP control, lane lines, life-saving equipment 

Also-remind other scenarios ​

If buyer actually needs wave experience, direct them to Wave Ball / Blower Wave / Vacuum Tsunami; if they need pool sanitation chemicals, direct to water-treatment chemicals; if they need safety, direct to life jackets/rings; if they need pool marking, direct to lane lines.

What buyers should budget beyond “filter unit price”:​

• Filtration system: filter unit(s) + multi-media + replacement media
• Circulation pump & piping​ (inlet/outlet 75/100/110 etc.)
• Disinfection/chemical system​ (chlorine/ORP/pH/algicide/clarifier) — still required
• PLC/electrical cabinet & sensors​ (may coordinate with pool system)
• Civil works: machine room, sump, access, drainage, anti-corrosion
• Installation & commissioning​ (per agreement)
• Freight, customs, duty​ — freight NOT included, EXW/FOB Guangzhou
• If also building wave/tsunami feature: budget wave/tsunami CAPEX + pool-area civil​ separately (waves ≠ filter)

Cost-saving angle to highlight:​

This hydraulic-auto-backwash design can reduce labor and lower electricity profile vs traditional pressure-filter rooms; but total OPEX depends on bather load, turnover, water loss, chemical regime and maintenance discipline.

Selection tips for buyers:​

1. Provide pool area, volume, turnover rate, bather load (~2㎡/person ref.)​
2. Define flow (m³/h) and pipe sizes
3. Confirm chlorinated vs seawater/thermal water (material compatibility)
4. Do not size by “wave height” alone—size by water circulation & filtration turnover​
5. MOQ/lead-time: plan procurement early; factory inspection recommended

pool filtration system,water park filter,aeration fine filter,hydraulic automatic filter,auto backwash pool filter,swimming pool water treatment,wave pool water treatment,tsunami pool circulation,OEM pool filter manufacturer,water park water treatment supplier

hydraulic automatic aeration fine filter for water park,auto backwash filtration system 10-700 m3/h,pool filter for wave pool and tsunami pool,low OPEX water park filtration,replace traditional pressure filter pool,water treatment for seawater pool,freight not included EXW Guangzhou filter,LJZL water park filter,pool circulation system China supplier

#PoolFiltration #AerationFineFilter #WaterParkWaterTreatment #AutoBackwashFilter #SwimmingPoolFilter #WavePoolSupport #TsunamiPoolSupport #LowOPEX #OEMWaterParkEquipment #GuangzhouHongxing

Q1: Is this a wave machine / tsunami machine?​

A: No. It is a filtration/aeration/auto-backwash water treatment unit. It can serve circulation loops of wave/tsunami pools, but does not generate waves.

Q2: What flow rate does it handle?​

A: Typically 10–700 m³/h​ by model/configuration; final sizing by pool volume, turnover rate and bather load.

Q3: Does it remove the need for chlorine/chemicals?​

A: No. It handles physical filtration/aeration; disinfection/pH/ORP control is still required per standards.

Q4: What’s the difference between wave pool and tsunami pool?​

A: Wave pool usually uses blower/air (≈0.8–1.2m); tsunami/vacuum pool uses vacuum-chamber surge (≈1.5–3m), larger area/civil cost. The filter supports water treatment for both.

Q5: Is freight included?​

A: No, freight not included; buyer arranges shipping (EXW/FOB Guangzhou).

Q6: MOQ & lead time?​

A:   One MOQ (wholesale/OEM common), ~14 days after deposit (model-dependent), 40%/60% payment typical.